Key facts
- PIXL directly detected fine particles smaller than 2.5 micrometers and ultrafine particles of around 100 nanometers on surfaces exposed to Martian dust.
- Measurements were taken after 1,645 Martian days of exposure of the rover's samples and surfaces.
- On some surfaces, particles measured approximately between 100 and 300 nanometers; on others, the average was about 2 micrometers.
- Static electricity appears to influence which particle sizes adhere to each material.
- Martian dust has more rounded and less abrasive grains than lunar dust, but contains silicates and compounds such as perchlorates.
- Results may guide the design of suits, habitats, and procedures to protect future crews; health risk depends on dose and exposure duration.
Related records
The rover Perseverance does not require a spacesuit, but it carries small samples of suit materials exposed to the Martian environment. By analyzing the dust accumulated on these surfaces, the PIXL instrument directly detected fine and ultrafine particles, including some around 100 nanometers. The measurements were obtained after 1,645 Martian days of exposure and could help guide the protection of future crews.
Perseverance is part of NASA's Mars 2020 mission and explores the Jezero crater. Its primary objective is to search for signs of ancient microbial life, but the mission also provides useful data for preparing human exploration. The material samples are installed on instrument calibration targets on the rover: they remain exposed to dust while these targets serve to check the instruments' functionality.
Particles of different sizes on the surfaces
PIXL, an acronym for Planetary Instrument for X-ray Lithochemistry, measures chemical composition using X-rays. Its calibration target contains samples of Teflon and basaltic glass; another target, associated with the SHERLOC instrument, includes samples of Teflon and Vectran, a material used in spacesuits. The team examined the dust on these surfaces and applied a method to estimate particle size.
The analysis identified fine particles smaller than 2.5 micrometers and ultrafine particles of around 100 nanometers. On the Teflon of the PIXL target and the Vectran sample of SHERLOC, particles averaged about 2 micrometers. On the basaltic glass of PIXL and the Teflon of SHERLOC, sizes reached approximately between 100 and 300 nanometers.
The results indicate that the surface material influences how much dust adheres and of what size. Static electricity appears to play a role in this selection: grains become charged upon collision in the air, and different surfaces attract different particles. The smallest particles remained adhered for years of rover operations, while larger groups could detach over time.
Less abrasive than lunar dust, but with other risks
The studied Martian dust presents more rounded grains than lunar dust, worn by wind-driven collisions. This shape suggests they may be less abrasive. During the Apollo missions, lunar dust scratched visors, deteriorated outer suit layers, and damaged seals; some astronauts also experienced symptoms similar to hay fever.
Lower abrasiveness does not eliminate safety concerns. Martian dust is composed mainly of silicates, and chemical analysis found enrichment in sulfur, chlorine, iron, and phosphorus, as well as signals of calcium sulfate. It may also contain reactive compounds, including perchlorates. According to scientists, health consequences would depend on the amount inhaled and the duration of exposure.
On Earth, fine particles can penetrate deep into the lungs and reach the bloodstream. Martian ultrafine particles, due to their size, are relevant for evaluating how to protect the air systems of a future mission. Perseverance's results provide measurements to guide this work; they do not by themselves determine the exposure a crew would have.
Data to prepare crewed missions
The measurements could contribute to the design of suits and habitats, procedures for removing dust, and the establishment of exposure limits for crews. They can also help assess which materials and coatings retain fewer particles. These are applications for planning future missions, not mitigation systems already operating on Mars.
The study was led by Scott VanBommel, a researcher at Washington University in St. Louis, and included the participation of Abigail Knight. Their results were published in Proceedings of the National Academy of Sciences. The mission demonstrates how instruments sent to explore Mars can also provide relevant measurements for designing, in advance, ways to limit dust entry and exposure in future expeditions.